A dramatic principal that states every element of a story must be completely unnecessary and never called back to.
by redsleepinggrass November 29, 2022
Get the Chekhov's Unregistered Firearm mug.One of Canada's two gun lobby groups. The Canada Shooting Sports Association is the other. These groups consist of and are funded by Canadian citizens who want to preserve their firearms heritage and rights. Disarmament lobby groups are generally funded by governments, including IANSA and sub groups such as the Coalition for Gun Control.
The NFA is the voice of the Canadian people speaking out for their firearms rights.
The NFA is the voice of the Canadian people speaking out for their firearms rights.
The NFA, or National Firearms Association, is taking the RCMP to court over their illegal reclassification and confiscation of firearms from law-abiding Canadian citizens. They are fighting to help keep Canada free from a new Canadian police state.
by CanadianGunOwner October 26, 2010
Get the National Firearms Association mug.The asinine requirement to purchase a firearm (rifle or shotgun), ammunition or even BB guns in the People's Republic of New Jersey. Although not technically required for possession of such items, it does, as a generality, serve as a de facto proof of being "eligible" to possess firearms. Application for FID is typically made to the law enforcement agency at which one resides. Non residents apply at the nearest NJSP trooper barracks. The process is highly intrusive and involves signing a waiver to allow disclosure of mental health information to determine eligibility and the providing of references who must attest to the "fitness" of the applicant.
The process is supposed to take no more than 30 days, but do to prevailing anti 2nd amendment attitudes and sentiments held by most law enforcement agencies, it can take, in some cases, upwards of a year to be issued one; other localities, more accepting of the second amendment will issue within 30 days. In addition, there are multiple cases of denial for "arbitrary" and vague reasons, often termed as "public health and safety".
The process is supposed to take no more than 30 days, but do to prevailing anti 2nd amendment attitudes and sentiments held by most law enforcement agencies, it can take, in some cases, upwards of a year to be issued one; other localities, more accepting of the second amendment will issue within 30 days. In addition, there are multiple cases of denial for "arbitrary" and vague reasons, often termed as "public health and safety".
Oh you want to buy this gun, ok, let me see your Firearm Identification Card before we can proceed with this sale.
Oh, you want to apply for a FID. Here sign this mental health waiver and we'll hopefully issue your card in the next year or so.
LEO- Let me see your FID.
Law abiding citizen-Sir, respectfully, I do not need a FID since I am in possession under one of the exemptions provided for by NJ law.
LEO-Get the fuck out of the car and get on the ground!!!!! You cannot possess a firearm without a FID!!!!!
Oh, you want to apply for a FID. Here sign this mental health waiver and we'll hopefully issue your card in the next year or so.
LEO- Let me see your FID.
Law abiding citizen-Sir, respectfully, I do not need a FID since I am in possession under one of the exemptions provided for by NJ law.
LEO-Get the fuck out of the car and get on the ground!!!!! You cannot possess a firearm without a FID!!!!!
by LONFOG April 10, 2010
Get the Firearm Identification Card mug.To die. Derived from "hand over your firearms", and the quote from the late Charlton Heston, "you can have my gun when you prise it from my cold dead hands".
First you marry, then you have 2.7 kids, then you eat quiche, then you Heston over your firearms.
Both my grandfathers had Hestoned over their firearms before I was born.
Both my grandfathers had Hestoned over their firearms before I was born.
by Fearman April 13, 2008
Get the Heston over your firearms mug.3d gunner youtube
Gorilla glue and sawdust can be used to create a molded part that is strong and durable. Here is how you can make a molded part using Gorilla glue and sawdust:
Materials:
- Gorilla Glue
- Sawdust
- Mixing bowl
- Measuring cup
- Mixing spoon or spatula
- Mold or form
- Sandpaper
Instructions:
1. Mix the Gorilla Glue and sawdust together in a mixing bowl. Start with a ratio of 1:1, and adjust as needed to achieve the desired consistency. The mixture should be thick and moldable, but not too dry or too wet.
2. Press the mixture into the mold or form, making sure to pack it tightly and evenly. Smooth out the surface as much as possible.
3. Let the mixture dry for at least 24 hours, or until it is completely hardened.
4. Remove the molded part from the mold or form. If necessary, use a knife or other tool to carefully pry it loose.
5. Sand the surface of the molded part with sandpaper to remove any rough or uneven spots. You can also use sandpaper to shape and refine the part as needed.
6. Your molded part is now ready to use! It can be painted or finished as desired.
even substitue the sawdust for your drywall if ground with morter and pestol glue sticks work if mixed with alcohol.
Gorilla glue and sawdust can be used to create a molded part that is strong and durable. Here is how you can make a molded part using Gorilla glue and sawdust:
Materials:
- Gorilla Glue
- Sawdust
- Mixing bowl
- Measuring cup
- Mixing spoon or spatula
- Mold or form
- Sandpaper
Instructions:
1. Mix the Gorilla Glue and sawdust together in a mixing bowl. Start with a ratio of 1:1, and adjust as needed to achieve the desired consistency. The mixture should be thick and moldable, but not too dry or too wet.
2. Press the mixture into the mold or form, making sure to pack it tightly and evenly. Smooth out the surface as much as possible.
3. Let the mixture dry for at least 24 hours, or until it is completely hardened.
4. Remove the molded part from the mold or form. If necessary, use a knife or other tool to carefully pry it loose.
5. Sand the surface of the molded part with sandpaper to remove any rough or uneven spots. You can also use sandpaper to shape and refine the part as needed.
6. Your molded part is now ready to use! It can be painted or finished as desired.
even substitue the sawdust for your drywall if ground with morter and pestol glue sticks work if mixed with alcohol.
by Cody5050 May 21, 2023
Get the 3d youtube firearm 3 mug.by Gdisvvc April 2, 2023
Get the Possession of illegal firearms mug.To make a mold from paper mache or clay, you will need to follow these steps:
1. Choose the object you want to make a mold of and ensure that it is clean and dry.
2. Prepare the mold-making material. If you're using paper mache, tear strips of newspaper or tissue paper and mix them with a water-based adhesive such as white glue or flour paste until you have a thick, smooth consistency. If you're using clay, make sure it is properly prepared and ready to use.
3. Apply a release agent to the object. This could be petroleum jelly or a silicone spray, which will prevent the mold-making material from sticking to the object.
4. Apply a layer of the mold-making material to the object. For paper mache, dip the strips in the adhesive mixture and apply them to the object, overlapping the strips as you go. For clay, roll out a sheet of clay and wrap it around the object, smoothing it out as you go.
5. Allow the mold-making material to dry or cure completely, depending on the material you're using.
6. Once the mold is dry, carefully remove it from the object. If necessary, cut the mold open to allow for easier removal.
7. Your mold is now ready to use! If you're using the mold for paper mache, apply a release agent to the mold before applying the paper mache. If you're using the mold for clay, simply press the clay into the mold and remove it once it has taken the desired shape.
Remember to always follow the manufacturer's instructions when using any mold-making material.
1. Choose the object you want to make a mold of and ensure that it is clean and dry.
2. Prepare the mold-making material. If you're using paper mache, tear strips of newspaper or tissue paper and mix them with a water-based adhesive such as white glue or flour paste until you have a thick, smooth consistency. If you're using clay, make sure it is properly prepared and ready to use.
3. Apply a release agent to the object. This could be petroleum jelly or a silicone spray, which will prevent the mold-making material from sticking to the object.
4. Apply a layer of the mold-making material to the object. For paper mache, dip the strips in the adhesive mixture and apply them to the object, overlapping the strips as you go. For clay, roll out a sheet of clay and wrap it around the object, smoothing it out as you go.
5. Allow the mold-making material to dry or cure completely, depending on the material you're using.
6. Once the mold is dry, carefully remove it from the object. If necessary, cut the mold open to allow for easier removal.
7. Your mold is now ready to use! If you're using the mold for paper mache, apply a release agent to the mold before applying the paper mache. If you're using the mold for clay, simply press the clay into the mold and remove it once it has taken the desired shape.
Remember to always follow the manufacturer's instructions when using any mold-making material.
by Cody5050 May 21, 2023
Get the 3d youtube firearm 1 mug.