When you or an associate with carries around mad blades, knives, or cutlery (generally not picnic or plastic) for the purpose of well doing damage.
by JokerJustJokin0000 May 27, 2021
Get the bladesy mug.The act of choosing weapons when challenged in a street fight; challenger decides which weapon will be used and if challangee does not have said weapon, challangee is SOL.
Blades can be substituted with the following: belts, bottles, rings, purses, shoes, brass knuckles, paper, chairs, boxes, knives, etc.
Blades can be substituted with the following: belts, bottles, rings, purses, shoes, brass knuckles, paper, chairs, boxes, knives, etc.
C-Dub: I saw that ho Stephanie the other day and I thought about calling blades on her ass, so I did!
C: Was she packing?
C-Dub: Hell no! You know I cut that bitch! And what?
C: Cassie, you are crazy!
C: Was she packing?
C-Dub: Hell no! You know I cut that bitch! And what?
C: Cassie, you are crazy!
by The Shiznit! June 15, 2009
Get the Calling Blades mug.Related Words
A powerful being, older than time itself. When gods and demons ruled over all, when man had not yet set foot on the earth, and creatures roamed that only your most terrible nightmares could begin to imagine, even then Jack was old. His mask is a soul shell, which explains how he has lived so long. His soul resides in it. The mask itself tempting foolish yet powerful heroes to wear it, thereby giving Jack a new body. His greatest accomplishment is bringing forth the Sword of Aeons form a dark void... Then getting his arse whooped by a Hero.
Jack of Blades: The Gods and Demons you fear and worship are insignifigant fleas compared to my power!!
by Juraga January 7, 2006
Get the Jack of Blades mug.A term used to describe how badly someone is shaking either from the DTs or nerves or while attempting to do something small and detailed like threading the eye of a needle.
Described thus in reference to when a dog takes a dump, it often shakes its hind-end or whole body during the task. If it were razor blades being defacated, then the shaking would likely be infinitely more pronounced!
Described thus in reference to when a dog takes a dump, it often shakes its hind-end or whole body during the task. If it were razor blades being defacated, then the shaking would likely be infinitely more pronounced!
Scott: *trying to put a nut on a bolt wedged way up inside the frame of his car* "I can't...quite...get the mother...shit, I just had it...FUCK...I can't get it, my arm is going numb!!!"
Max: *watching Scott fumble and shake as his arm becomes spaghetti from the tedious task* "Dude, your shaking like a dog shitting razor blades."
Max: *watching Scott fumble and shake as his arm becomes spaghetti from the tedious task* "Dude, your shaking like a dog shitting razor blades."
by psiscott April 27, 2006
Get the shaking like a dog shitting razor blades mug.by twojastaraherbaciara June 3, 2021
Get the blades raczynski mug.Blades of Glory is a sex act. It is when 2 people do it doggy style on roller blades. The male has them on his feet while holding the girls feet, and the woman has them on her hands. A ramp is optional.
by Everybody in Will's basement. July 26, 2009
Get the Blades of Glory mug.One who smithes (or "forges" is you're a purist) blades. Which, by the old ways would involve: Heating an iron rod to cherry red in a forge, and hammering into whatever shape you wish your sword to be. Iron is lighter than steel, but doesn't hold an edge as long. So, many times, the bladesmith would turn the blade on edge, and with a hammer and chisel, would split the edge of the blade in for a half inche or so, and insert an edge of steel. They would then re-heat the item, and hammer the iron down onto the inserted steel, fusing them together. They would then temper the blade by heating the entire piece to cherry-red, and then submerging it in water, or oil. This would harden the blade. However, if left like this the sword would be to hard and brittle to use, and would break opon the first blow. So they would then re-heat the blade to a deep red, and stick it in dry ashes to cool slowly. This would partly anealIn this way, they would aneal, or soften the metal, while not entirely removing the temper. The would then be hard enough to use in battle, but soft enough, and springy enough, that in wouldn't shatter on impact. They would then polish and sharpen the blade. In this way the smiths would create a sword with a steel edge, but that wieghed much less than a sword of only steel.
The modern way is to: Use a high-speed grinder to grind a bar of steel down into the shape of the blade you wish to make, then switch to a finer grinding wheel, and finally a buffing wheel to polish. With a whet stone, you can then put an edge on it. The modern method isn't nearly as good as the old methods, though. Sword created by this method are really only good as display models. It's a shame that so many of the ancient ways have been lost. In this era, you could spend your whole life studying the art of bladesmithing, and never even come close to the skill level of an apprintice. The blades of old could cut through solid stone without scratching the metal. Many of them had edges that where only a few atoms in width, but were strong enough to slice through armor like paper. With the finest, you could hold the sword out in front of you, and a silk cloth dropped on it would be cut cleanly in two, of its own wieght. Smiths were held in the highest regard in the middle ages, placed in the same ranks as the priests and poets. The smith was the only craftsmen to work with all four of the basic elements (for they belived in only four at that time). He used fire in his forge, air in his bellows, to blow the fire hotter, water to quinch the metal, and earth, the iron he used. (iron was known as the "black metal," the metal of the earth.)
There are still many people who blacksmith and bladesmith as a hobby. (I, am of course, one of them.) It really is a wonderful hobby to take up. Anybody can do it, it just takes a lot of work. (I'm only 15.)
It's a very rewarding and interesting thing to do! Ask around, there's probably a forge near you, that you could use. (Or, you can build your own, like me.)
Good luck!
The modern way is to: Use a high-speed grinder to grind a bar of steel down into the shape of the blade you wish to make, then switch to a finer grinding wheel, and finally a buffing wheel to polish. With a whet stone, you can then put an edge on it. The modern method isn't nearly as good as the old methods, though. Sword created by this method are really only good as display models. It's a shame that so many of the ancient ways have been lost. In this era, you could spend your whole life studying the art of bladesmithing, and never even come close to the skill level of an apprintice. The blades of old could cut through solid stone without scratching the metal. Many of them had edges that where only a few atoms in width, but were strong enough to slice through armor like paper. With the finest, you could hold the sword out in front of you, and a silk cloth dropped on it would be cut cleanly in two, of its own wieght. Smiths were held in the highest regard in the middle ages, placed in the same ranks as the priests and poets. The smith was the only craftsmen to work with all four of the basic elements (for they belived in only four at that time). He used fire in his forge, air in his bellows, to blow the fire hotter, water to quinch the metal, and earth, the iron he used. (iron was known as the "black metal," the metal of the earth.)
There are still many people who blacksmith and bladesmith as a hobby. (I, am of course, one of them.) It really is a wonderful hobby to take up. Anybody can do it, it just takes a lot of work. (I'm only 15.)
It's a very rewarding and interesting thing to do! Ask around, there's probably a forge near you, that you could use. (Or, you can build your own, like me.)
Good luck!
by Whind Soull February 3, 2005
Get the bladesmith mug.