Skip to main content

track stand

The track stand is a bicycle maneuver in which the cyclist perches over the bike, trying to hold it almost stationary. The track stand may look, to a non-cyclist as if the rider is about to lunge forward, which may happen if the cyclist loses control of the bike.

To “track stand” is to hold a bicycle more or less stationary by perching over the cycle and rocking back and fourth slightly such that it does not fall down, as it would if it were completely still.

This move is easier to perform on a fixed-gear, or (racing) track bike, hence the name. The direct drive from pedals to drivetrain on a ‘track bike’ allow the cyclist to gently rock back and fourth. Timed track stands competitions now feature at many bike messenger and fixed bike enthusiast meets.

The move is also used widely by mountain bikers. Since the freewheel, which only engages when the cranks are pedaled forward, is common on mountain bikes, the technique usually involves a slight incline so that the cyclist can gently pedal up and allow the bike to rock back. This allows a biker to pause before negotiating a particularly technical bit of terrain such as a deep crevasse, a jump or a stream.

Any cyclist can hold a track stand on any bike for about fifteen seconds, often long enough for a light to change color, or enough of a pause to stop for a stop sign without stepping off of the pedals and leaving the riding position.

Like a lot of US slang, the term can be used as a noun or a verb, or even an adjective for the particularly linguistically obtuse.
The Chinese acrobat busted a track stand and then 30 people made a pyramid on top of her and the bike.

When I hold a track stand at an intersection, drivers think that I am trying to bomb through, not stand still, perhaps due to the perched-over-the bike position.

Dude, time me while I do a track stand on my new fixie – while wearing tight jeans, $2,000 worth of trendy clothing and a bunch of heavy shit stuffed into a messenger bag.
track stand by Professor reZz December 18, 2007
track stand mug front
Get the track stand mug.
See more merch

track stand

The track stand is a bicycle maneuver in which the cyclist perches over the bike, trying to hold it almost stationary. The track stand may look, to a non-cyclist as if the rider is about to lunge forward, which may happen if the cyclist loses control of the bike.

To “track stand” is to hold a bicycle more or less stationary by perching over the cycle and rocking back and fourth slightly such that it does not fall down, as it would if it were completely still.

This move is easier to perform on a fixed-gear, or (racing) track bike, hence the name. The direct drive from pedals to drivetrain on a ‘track bike’ allow the cyclist to gently rock back and fourth. Timed track stands competitions now feature at many bike messenger and fixed bike enthusiast meets.

The move is also used widely by mountain bikers. Since the freewheel, which only engages when the cranks are pedaled forward, is common on mountain bikes, the technique usually involves a slight incline so that the cyclist can gently pedal up and allow the bike to rock back. This allows a biker to pause before negotiating a particularly technical bit of terrain such as a deep crevasse, a jump or a stream.

Any cyclist can hold a track stand on any bike for about fifteen seconds, often long enough for a light to change color, or enough of a pause to stop for a stop sign without stepping off of the pedals and leaving the riding position.

Like a lot of US slang, the term can be used as a noun or a verb, or even an adjective for the particularly linguistically obtuse.
The Chinese acrobat busted a track stand and then 30 people made a pyramid on top of her and the bike.

When I hold a track stand at an intersection, drivers think that I am trying to bomb through, not stand still, perhaps due to the perched-over-the bike position.

Dude, time me while I do a track stand on my new fixie – while wearing tight jeans, $2,000 worth of trendy clothing and a bunch of heavy shit stuffed into a messenger bag.
track stand by Professor reZz December 31, 2007

Stand flat footed and shit in the back of a dump truck 

(adj)Having the physical apperance of being tall.
"Damn, Nate could stand flat footed and shit in the back of a dump truck."

RFID, standing for Radio-Frequency Identification, is a technology that uses radio waves to identify and track objects or people, offering a wireless and non-contact alternative to barcodes.

RFID, standing for Radio-Frequency Identification, is a technology that uses radio waves to identify and track objects or people, offering a wireless and non-contact alternative to barcodes.
RFID, standing for Radio-Frequency Identification, is a technology that uses radio waves to identify and track objects or people, offering a wireless and non-contact alternative to barcodes.

truck standards 

When a guys truck is so nice it raises your standards for them
Girl: Jeff's like a 4
Girl 2: Yeah but his truck is lifted so he's like a 7 with truck standards

Dallas Dump Truck dumping Cincinnati Sandbags

After a day at the beach, dipping one's sandy testicles into another's mouth while defecating on their forehead or chest
Last night you looked like a Dallas Dump Truck dumping Cincinnati Sandbags

too much sand for my truck 

Portuguese people have a saying that goes "muita areia para a minha camioneta" or too much sand for my truck which basically means that they're overwhelmed and can also be used to describe a person that is way too attractive for them as in they could never handle having any sort of relationship with said person.
*hot chick walks by*
dave: damn
miguel: dude, she's too much sand for your truck
dave: oh c'mon, she definitely isn't too much sand for my truck
too much sand for my truck by lipa4 February 22, 2018