Shroomer is an overclocker.
by Charles Ray March 21, 2003
Overclock - to raise the speed of the CPU, GPU, memory, or any buses with the quantifier that tells its speed: "hertz".
To overclock is to force some hardware mentioned above to run at faster, often non-intented speeds.
Generally this is doable, however few factors come in such as when one overclocks a piece of hardware to its max the power circuitry usually does not deliver enough voltage to the hardware, thus the voltage needs to be manually raised.
When raising the voltage, heat will be generated more substantially, which is the hardware's number one enemy.
Thus is why companies like Thermaltake and Globalwin have mustered their efforts to produce efficient and powerful cooling systems to counteract the heat.
To overclock is to force some hardware mentioned above to run at faster, often non-intented speeds.
Generally this is doable, however few factors come in such as when one overclocks a piece of hardware to its max the power circuitry usually does not deliver enough voltage to the hardware, thus the voltage needs to be manually raised.
When raising the voltage, heat will be generated more substantially, which is the hardware's number one enemy.
Thus is why companies like Thermaltake and Globalwin have mustered their efforts to produce efficient and powerful cooling systems to counteract the heat.
Using the motherboard's BIOS. I set the FSB to 210mhz, thus overclocking a 10mhz difference on my FSB.
I used RivaTuner to overclock my video card's memory's clock speed from 250mhz to 305mhz.
I used RivaTuner to overclock my video card's memory's clock speed from 250mhz to 305mhz.
by Andrew the kool January 1, 2004
by grubby91 January 21, 2006
by grubby91 January 16, 2006
A PC or computer that has been rewired or reprogrammed to work faster than normal; usually causing massive overheats and explosions if not cooled properly
by Andrew Kismet August 20, 2003
To raise the clock speed of a graphics processing unit, central processing unit, or memory module by raising the front side bus (FSB) or the multiplier.
The end clock speed is determined by using the following equation
Multiplier * FSB = mhz
Sometimes additional voltage is required to achieve higher speeds.
Overclocking almost always requires more cooling than "stock" parts provide. And generally shortens the life of a componant.
The end clock speed is determined by using the following equation
Multiplier * FSB = mhz
Sometimes additional voltage is required to achieve higher speeds.
Overclocking almost always requires more cooling than "stock" parts provide. And generally shortens the life of a componant.
I overclocked my Athlon by unlocking the multiplier and upping the FSB. I had to add .5v to make it stable though.
by Shayne September 29, 2003
by ttowncosmo November 20, 2007