The result of use of vibrant lights in a low light setting along with a low shutter
speed.
Being in a low light setting means that you are going to have to set your SLR to certain settings in order to compensate for the little amount of light that the lens
will be able to take in.
Whilst using these settings, the shutter speed generally
will have to be quite
slow to let in more light, with this happening, you
will have to either use a tripod or hold a very steady hand!
Instead of doing this however and to create a more creative photo, use these settings along with your flash (onboard is
fine). Whilst have a shutter speed of about 3 seconds, set up a scene where there are vivid lights, take the photo (the flash
will capture your setted scene) and once the flash has gone off, move the camera around (up, down, side to side, loopdy loop) and this
will cover your set scene in neon type light streaks.
This method uses a form of light graffiti with low light flash photography.
Your in a club as the events photographer, you over looking the dance floor from a tier up. There are strobe, spot and laser lights operating around the roof of the dance floor.
You've got a scene of the ravers having a good
time on the dance floor, you want to capture it but your wanting something more, something more exciting.
Setup up your camera with the right low light settings, shutter
speed about 3 seconds and ISO not too high to lose out on good colour composition.
Turn on your flash and take the photo, once the flash has captured your initial scene, move the camera around, making sure to pass the lens by the clubs lighting.
The resulting photo
will have a nice clear
shot of your set scene yet it
will have a nice layer of vibrant
neon like light streaks across it all.
It's important to get the right balance of both scene and light streaking as too much of either
will be too bland or too overshot with light.
Check it, you've just come into the world of Neoglyphography!
